Blog Archives

How much space on my roof do I need for a solar PV installation?

Our grid connected systems start from around 1kW peak power, this occupies about 8 square metres on your roof.

Leave a comment

How much electricity does a PV system output?

For every kW peak power installed on a South facing roof the system will generate around 800 kWh. This reduces by around 20% for an East or West facing roof.

Leave a comment

How much does a Solar PV system cost?

Installed prices (including VAT) start from around £4000 – £6000 (inc VAT per kW peak power. There are no longer any grants available as these have been replaced with the Feed In Tariff (FIT)

Leave a comment

Will I be eligible for the new Feed In Tariff (FIT)?

The FIT pays up to 41.3p/kWh (

Leave a comment

Do I need planning permission?

Our roof mounted systems do not need planning permission unless the property is listed or in a conservation area.

Leave a comment

Will my roof be strong enough?

Most roofs are strong enough to take a solar installation without any reinforcement.

Leave a comment

What is the payback for a solar PV installation?

We would expect a system to pay for itself about 5-6 times over 25 years of use. This is based on an annual fuel inflation of 12.9%, calculated by Ernst and Young and the governments new feed in tariff proposals. … Continue reading

Leave a comment

Do I need to inform my electricity supplier?

For systems below 16 Amps output (approx 4kW peak power) we will inform them once the installation is complete. For systems larger than 16 Amps we will require permission in advance from the network operator.

Leave a comment

Can I export any of the electricity I generate?

Yes, all unused electricity will automatically be exported, your electricity company can fit an export meter or they can pay you based on estimated export rates (usually 50%), sometimes the electricity supplier can authorise us to fit the export meter. … Continue reading

Leave a comment

How are the panels fixed to the roof?

For standard roof we use rigid stainless steel brackets that are fixed directly to your roof rafters. The brackets hook out from underneath your existing tiles.

Leave a comment

If you have recently had an install, we’d love to showcase your project in our gallery of work, to submit your install and give us some feedback click the link below to fill in our online form and upload your images.

Submit your install >